One DSP (TI TMS320C6727B) is dedicated to the transmitter and receiver, and the other (TI TMS320C6720B) to the spectrum scope. Its main features are: Two independent DSP units. Press SET > LEVEL, then scroll up to SSB TX Tone (Bass) rotate the main tuning dial to set the Bass to -2 for starters (-4 if using the PR-40 or similar mic with lots of bass response). Always keep in mind that the ONLY way to adjust the Microphone Gain control is by watching the ALC meter.
#Ic 7800 w2ihy pro#
Any of the 'iC' products also will work with the PRO or 7800 series just be careful to adjust the mic gain for proper ALC action, as the Heil 'iC' products have lots of output. First, the original 756 PRO III and Alpha 87A operating postion, followed by the new equipment configuration which now accomodates an IC-7800 as the primary transceiver, along with both an Alpha 9500 for HF and an Alpha 8406 amp for 6 meters. (MIC connector has RED Shrink Tubing on it) Here are a couple of views of the ranch station. ICOM IC-7800 Reviews Summary for ICOM IC-7800 Reviews: 105 Average rating: 4.7/5 MSRP: 10,000 US Description: The ICOM 7800 HF/6M was first introduced at the Dayton Hamvention 2003. Please advise which radio this will connect to so I ship you the right adapter The IC-7800, the IC-7851 does not swap receivers. Yes, I have re booted, CPU reset, RIT etc is not on, I used the built in reference adjustment system the radio has (turn Calibrator marker on and use the REF ADJUST) but it makes no difference. W2ENY ADAPTER fits NOISE-CANCELING MIC/HEADSET Hi all, I just bought a used Icom IC-7800 (2004 build) and find it's off frequency by like 20-30hz.
0 kommentar(er)
